Want To Install Pex Pipe In A Short Period Of Time – Read On

When it comes to piping systems, there is no doubt that PEX or cross linked polyethylene is considered to be a much better option. This is because of a number of obvious reasons. First and foremost, PEX is cheaper when compared to copper and other metals. The cost of half-inch tube is around 30% of that of copper. However, a part of the savings might offset by the fact that you need special tool for installing the fittings. But at the end of the day, when you are undertaking large or even medium sized plumbing jobs, you have reasons to believe that you will save bit money when you use PEX instead of copper. It has been proved time and again that PEX is much faster as far as installation is concerned when compared to copper. Therefore if you are using a home run system, you would do better to choose PEX instead of copper. It is almost similar to having a garden hose to each and every fixture in the home. They are easy to install and then can be done super fast. Even otherwise when you use PEX in the conventional main line of your home or other place, it is much faster when compared to soldering copper. Hence given the above facts, there are reasons to believe that going in for PEX would be a much better choice.

Some More Benefits Of PEX

Apart from the above, there are also a few more reasons as to why going in for PEX will be a much better choice. Unlike copper, the risk of corrosion can be avoided when you decide to go in for PEX. It is all about understanding PEX pipes and once you are able to find out this you will certainly not like to go in for anything else. For example if you are living in an area where the water is very acidic then it is quite obvious that copper will get corroded over a period of time. However, when you install PEX piping systems you can be sure that you will not have this problem.

Are Special Tools Needed

Another wrong misconception and myth surrounding PEX is that you need special tools for installing of the same. However, this is not the case because using ordinary tools it is very much possible to fix these piping quite effective. Simple tools like compression fittings and stab-in tools are enough for you to make the connections. But when it comes to large projects it is quite possible that they could be very expensive. But if you look around and do some research you will certainly come across a few tools. However, you have to do your research and choose something that is affordable and at the same time it must be practical for those who want to follow some proven and time tested DIY methods and ways. You could try out cinch clamps and crimp rings. Crimp rings are bands made of metal and copper is the metal usually chosen for this purpose. You can easily slip it over the fittings and using a crimp ring tool you can compress it and ensure that it stays in place.  However, you might need separate and unique crimping tools depending on the size of the piping. Generally the piping comes in the size range of 12 inch or 3/4 inches.

Why Are They So Popular?

There are some reasons to believe that cinch clamps are almost the same like traditional band clamps which you must be familiar with. The big advantage is that the same cinch clamp tool can be used for clamping and tightening the pipes. It also does not cost too much and there are cinch clamp tools that could be available for a price range of $40. Though you could get two handed versions, many customers are perhaps happier using the one handed version. This is perhaps because it could help you to hold the ring in place with on hand while the other hand could be used for tightening the clamp and the piping with the other.

Therefore at the end of the day there is no denying the fact that there are obviously a number of advantages when you decide to go in for PEX pipe in place of copper pipes or pipes made from other materials.