6 Tips to Choose the Best Lighting for Your Garage Workshop

If you care about your safety and comfortability in your living room, why not in the garage workshop? You should prioritize good lighting in the workshop to facilitate fixing any issues of your vehicles and your own Do it Yourself (DIY) projects. It seeks more attention to have the perfect lighting in your workshop garage as the tasks are noisy, dirty, and cumbersome that you can’t perform anywhere else. A properly organized lighting can increase your productivity tenfold. Optimal lighting can also ensure your safety, improve navigability, efficiency, and aesthetics in your garage workshop.

You are fortunate enough that many LED shop lights for garage options are there offered by various brands like Lepro and it’s not that difficult to choose one from if you know the factors to be considered very well and which lighting option might be suitable for your garage. If not, no worries, go through the tips presented in this write-up and have your own lighting setup to ensure safety and maximum productivity:

  1. Decide the Type of Lighting Your Workshop Requires: Usually, a garage should have all three types of artificial lighting, ambient, task, and accent, for specific purposes. Ambient light illuminates the space and makes your movement safe and easy in the workshop, task lighting controls the brightness and visibility of your workstation to help you perfectly complete the detail-oriented projects, and the accent lighting is used to shine a light on a specific object you want to emphasize.
  2. Choose the Lumens That Produce Enough Brightness to Cover Every Corner of The Garage: Brightness of light is no longer being measured by watts; lumen is the scientific measurement of the output of true light. Ideally, bulbs with 3500 lumens are used in the garages. Experts recommend 50, 300, and 75 lumens per square foot for ambient lighting.
  3. Use the Light That Saves Energy and The Environment as Well: You may have a lot of exciting options, but if you care about your household energy bill and its impact on the environment, you should consider energy-saving LED bulbs disregarding the time you spend in your garage workshop. These bulbs consume almost 60% less energy than a traditional bulb. Moreover, they don’t generate heat and contain mercury or emit harmful ultraviolet rays.
  4. Know the Bulb Diameter Your Workshop Needs: The area a bulb can cast light over depends on the diameters of a light. Tubes can cover a wider area than pear-shaped bulbs; they come in three diameters, T5 (5/8 inches), T8 (8/8 inches), and T12 (12/8 inches). You know which one will fit well in your space and cover the whole area.
  5. Decide How Long You Want the Lighting to Survive: It is unworthy of mentioning that light having a longer lifespan will be preferred by everyone. LED lights serve a longer period up to 50000 hours than fluorescent bulbs.
  6. Ensure Protection for Your Bulbs: It’s better to protect the lighting than replacing them frequently. Needless to say, that you will store a lot of equipment and carry many activities in your workshop, ensure proper housing so that the bulbs remain safe and durable.

Conclusion

Lighting will make your garage workshop appear more cheerful and make a perfect working space where you can deliver your best productivity and ensure the completion of your projects on time.

Disclaimer: The views of authors published on South Africa Today are their own and do not necessarily represent the views of South Africa Today. By viewing, visiting, using, or interacting with SouthAfricaToday.net, you are agreeing to all the provisions of the Terms of Use Policy and the Privacy Policy.